Lindy
4/29/2009
Another quick night tonight...I forgot I had to run the power wire for the AHRS unit, so I did that first, then I started tidying up the wire bundles. I'm not quite done behind the panel (ignition and smoke still to go), so I started at the bottom...
That was getting to be quite the nest of wires...looks MUCH better now!
I took this picture before the one above, and you can see the messy wires on the floor, but here is the panel all done with the exception of the two plugs I need for the switch panel, and the right side fresh air vent.
I had hoped to tackle the LSI wiring tonight, but I need to re-read the manual on that first...
I'm gonna try really hard to have this ready to move to the airport on Sunday this weekend...Brit is gone for the next few days, so I'll be working on this as much as I can to get things done to move it.
0.75 hours