|
|
|
Home
Lindy |
August 2006 Wings August 1st Fabricated landing light bulb holder August 3rd Cut and fit landing light plexi lens August 7th Drilled and countersunk/dimpled attach holes in lens August 8th Fabricated retaining strips August 10th Riveted platenuts to retaining strips August 12th Installed lens and bulbs August 13th Tested for power, riveted LE ribs to spar August 15th Riveted LE's to spars August 16th Misc. rib to spar riveting August 17th Started leak testing left tank August 18th Sealed a couple of small leaks August 19th Leak tested right tank August 20th Set tanks on spars, cleco'd top skins on August 21st Started riveting top skins, torque'd down tank bolts August 22nd Riveting top skins August 23rd Riveting top skins August 24th Finished riveting top skins, ran wiring conduit August 26th Removed left tank to wire sender, flipped wings to cradle, aileron brackets August 27th Rearranged garage August 28th Riveted aileron brackets, started on the flap braces August 30th Misc. drilling and deburring
|