Lindy
8/19/2009
More fiberglassing...I had a rather large gap on the right side of the plenum to front baffle area, and the best, easiest way to take care of this, is to lay down some more glass to meet the baffle that I bent upward to get closer to the plenum.
The left side has a couple gaps, but I think I can take care of those with some silicone baffle seal and RTV (I'll need some on the right too).
Since I have 'glass curing up top, I decided to work on the bottom. I got my drilled head bolts in today for the carb bowl, so I mounted that...
I did have to do some minor sanding on the left front area so the head of the bolt cleared.
Once I figure out the final location of the FAB, I'll safety the bolts to the carb.
2.75 hours