Lindy
8/31/2009
Brittne is finally starting to make a turn with her wisdom teeth holes, and tonight she had to be out at the kennel club, so I went straight to the hangar after work to get my build fix. I picked up right where I left off last week with the baffles, and got them more or less finished...
Then I installed the oil cooler. Nothing major here, just had to cut some spacers from tubing, and then bolt it up!
Then I made the tie rods that keep the bottom of the baffles secure (no pics). I'll have to put threads on them at work tomorrow, and then the baffles will pretty much be done, other than figuring out how to best seal the front air dam to the plenum.
2.75 hours