|
|
|
Home
Lindy |
August 2009 End Game August 3rd Installed inlet rings August 5th Split the cowl, cleaned up, sanded August 7th Started working on the plenum/baffles again August 8th Plenum fitting and drilling August 9th Deburred plenum and baffles, riveted PN's to plenum August 12th Cut oil recess and re-glassed to plenum, trimmed baffles August 13th Finished 'glassing the oil recess August 14th Lower intake ring, fit plenum, 'glassed front of plenum August 15th Lower intake ring installed, more 'glass up front August 17th Cleaned up lower intake ring, started fitting plenum to front baffles August 19th Front plenum/baffle interface, mounted carb bowl August 23rd Primed the baffles, started fitting the oil cooler August 24th Drilled oil cooler doubler to baffles August 26th Started riveting the baffles together August 31st Baffle installation, installed the oil cooler
|