7/14/2008
Quick night tonight...I started by putting that other SS bolt in the left side of the heater valve after cleaning the threads.
Then I worked on finishing out the screws across the tip up ribs. Nothing special about any of this, but I did take a pic of how we installed the stacks of washers that I used for spacers. A piece of tape cut to the thickness of the washers, then wrapped around them made easy work of holding them in place. GREAT idea Carl!!
Just a few shots of the canopy with all the screws in place for good.
Tomorrow I'm gonna go buy some black silicone to seal the gap around the screws, and put a small filet along the side skirts to keep water out of that track. Then it's on to the bottom latches.
1.0 hour