chadandbrittne.com

 

Home

Chad's RV-7

Brittne's Page

Wiley

Yeager

Wiley & Yeager

Other Stuff

Links

email

3/3/2004

All I had time to get to today was to finish getting the J channels located and drilled every fourth hole.  Here you can see the J channel lines are cleco'd.

Then I removed the 712 bulkhead to bend the flanges to match the angle of the taper of the skins.  I also flanged the 711 bulkhead, but did this without removing it.

1.5 hours

Previous  Next  Index  RV-7 Home