Lindy
5/10/2007
I got just a small amount of time on the airplane tonight...I got called to fly a medical trip, and I'm leaving in about a half hour. So, all I did tonight was taped off the flap handle and control sticks for powdercoating, then I disassembled the forward section skeleton. I read some websites today, and the instructions again, and there really is no way to prep and rivet the skeleton without taking it apart completely. The center section has to come off anyway. So I removed those parts.
Here's all the parts that I have to deburr/dimple/countersink. I also have to work on the bottom skin, and the firewall.
0.75 hours