Lindy
5/4/2007
I didn't get a whole lot of time today to work on the airplane, but I did get something done. I started by clecoing and drilling the aft baggage side skins to the ribs.
Then I drilled the F-724 vertical ribs to the longerons and 623 floor ribs.
After that was done, I took a look at the instructions, and determined that before I start the "laundry list" of things to do before starting riveting, that I needed to finish out some drilling of the skins. I got it all done except the bottom forward skin to the lower firewall.
1.5 hours