Lindy
10/31/2009
I had a busy morning this morning, so I didn't get out to the hangar until mid-afternoon...No pics of the manifold pressure line clamps. I am two clamps short, and I'll take pics after I get them done.
Then I worked on finishing up the wiring for the wing strobes. I had to splice about 18" of strobe wiring for the left side to get it to reach the power supply. After doing that, I put the ends on the wires and hooked up the grounds locally.
Then I hooked up the power and control harnesses...
Not a very good pic, but everything is hooked up. I installed a 15A fuse, and flipped the switch! There are 15 different strobe patterns, so I have to find the one that fits within the regs, but they work!
4.0 hours